Siser
Be Mine #6 Printed HTV
Be Mine #6 Printed HTV
Couldn't load pickup availability
Sheet = 14in x 12in.
Cut Settings
Cricut: Blade: Standard Setting: Iron-on
Silhouette Cameo: Blade: Standard, 3 Material: Heat Transfer, Smooth Speed: 8 Force: 6
Brother ScanNCut: Blade: Standard, 2 Cut Speed: 1 Cut Pressure: 1
Application instructions
Applies To:
• 100% cotton
• Poly/cotton blends
• 100% polyester
• Leather
Heat Applications
HEAT PRESS
-Cut pattern side up~ Do NOT mirror your image (treat similar to adhesive)
-Weed
-Mask with TTD Easy or TTD High Tack Mask
-Press shirt/item for 2-3 seconds to remove moisture
-Apply design at 300°F/149°C with medium pressure for 15 seconds
-Peel Warm
HOME IRON
-Set iron dial between Cotton and Linen
-Cover design with Kraft paper or non-stick cover sheet
-Place on flat, hard surface (ironing board not recommended)
-Press iron with medium/firm pressure (do not slide iron)
-Press each section of design for 10-15 seconds
-If areas of design lift after application, replace cover sheet
and re-press for 5-10 seconds
-Peel carrier hot or cold
Laundering:
-Wait 24 hours before 1st wash
-Machine wash cold / mild detergent
-Dry on normal dryer setting
-Do not dry clean or bleach
Share
![Be Mine #6 Printed HTV](http://hometownvinylandmore.com/cdn/shop/products/ScreenShot2020-04-11at11.34.23AM.png?v=1586624749&width=1445)
![Be Mine #6 Printed HTV](http://hometownvinylandmore.com/cdn/shop/products/ScreenShot2020-04-11at12.00.04PM_6cb59391-bfb6-4533-911a-452522bcfbb2.png?v=1586624749&width=1445)
![Be Mine #6 Printed HTV](http://hometownvinylandmore.com/cdn/shop/products/ScreenShot2020-04-11at11.59.28AM_ad5a8313-f6e5-4eb9-8f61-7efb5be2f498.png?v=1586624749&width=1445)
![Be Mine #6 Printed HTV](http://hometownvinylandmore.com/cdn/shop/products/ScreenShot2020-04-11at11.59.38AM_2449a757-25d4-417f-b64d-a80039aa73d2.png?v=1586624749&width=1445)